Guide · Editing

Change the camera angle of a photo with AI, from a single image

See a product in profile, a character from behind, a scene from above: the Angles tab of AI retouch moves the camera around the subject of a still image. You turn the camera on a sphere or with three sliders, and the model redraws the scene from that viewpoint. No prompt to write.

5 min readBeginnerUpdated 18 November 2026

In short

To change the angle of a photo: open the image in AI retouch, Angles tab, pick a Quick select position (Front, 3/4 right, Right profile, Left profile, Back, High angle) or set Rotation (0 to 360°), Tilt (-30° to 90°) and Zoom (0 to 10), then click Angles. The result is added as a new image, or a new version on a board.

Your image
Angles
Rotation
0 to 360°
Tilt
-30° to 90°
Zoom
0 to 10
New viewpoint
How it works: your image, a camera placed on a sphere, and the same scene seen from elsewhere.Open the studio

What the Angles tab does

Angles aims to keep the scene and moves the camera. The model is fixed: Qwen Image Edit 2511 Multiple Angles, which receives three numbers and no text from you: the camera instruction is built from those values. Rotation goes around the subject (0° front, 90° right side, 180° back, 270° left side), tilt goes from a low angle (-30°) to a top-down view (90°), and zoom from a wide shot (0) to a close-up (10). What the photo does not show, like the back of an object seen from the front, the model has to infer. It is neither a file rotation nor a perspective correction. For a video whose camera circles the subject, see the MiniMax H3 Multi Angle guide.

6 positions

in Quick select: Front, 3/4 right, Right profile, Left profile, Back, High angle

0 to 360°

of rotation, and -30° to 90° of tilt

0 to 10

of zoom, from wide shot to close-up

The four steps

  1. Step 1

    Open the image in the Angles tab

    In Generate, click an image, then the Angles tab of the preview, the last one in the strip. On a board, select a single image, then the wand button "AI retouch". The gallery of a workflow, the App mode gallery and the history of a board open the same editor. Start from an image where the subject is sharp and whole: the model turns around what it sees.

  2. Step 2

    Pick the viewpoint

    Quick select places the camera in one click: Front, 3/4 right, Right profile, Left profile, Back or High angle. At the start, the camera is slightly raised (tilt 30°), in a wide shot. Between those positions, hold and drag the camera on the 360° sphere: it moves around the thumbnail, and the sphere shrinks as you zoom in. With the keyboard, the arrow keys turn it by 15° sideways and 10° up or down.

  3. Step 3

    Fine-tune with the three sliders

    Rotation from 0 to 360°, Tilt from -30° (low angle) to 90° (top-down view), Zoom from 0 (wide shot) to 10 (close-up), with 5 giving a medium shot. The sliders and the sphere move together. Example: rotation 45°, tilt 0°, zoom 5, for a three-quarter view at eye level in a medium shot.

  4. Step 4

    Run it and follow up

    The button shows "Angles" and the price for your image, based on its size in megapixels. The result, a PNG image, lands in your generations with the Angles badge, or becomes a new version of the item on a board; the original stays in place. For several views of one product, run it again from the original image with another angle. To even out the light across the series, then use Relight.

The settings at a glance

SettingValuesReference points
Quick selectFront, 3/4 right, Right profile, Left profile, Back, High angleHigh angle: camera 60° above the subject
Rotation0 to 360°, 0 to start with0° front, 90° right side, 180° back, 270° left side
Tilt-30° to 90°, 30° to start with-30° low angle, 0° eye level, 90° top-down view
Zoom0 to 10, 0 to start with0 wide shot, 5 medium shot, 10 close-up
360° sphereDrag it, or use the arrow keys15° sideways, 10° up or down per key press

Ideas

Show a product from several views

Front, 3/4 right, profile and back from a single product photo, for an online store listing. Check each view and keep only those true to the real product: what the starting photo does not show is inferred by the model.

Vary the shots of a storyboard

The same set from a high angle, then a low angle, then in close-up: a way to test a shot list before moving to video, with the storyboard guide.

Move on to a moving camera

For a continuous camera move rather than still views, MiniMax H3 Max Multi Angle starts from a single image and follows a camera path.

Frequently asked questions

How do I change the camera angle of a photo with AI?
Open the image in AI retouch, Angles tab. Pick a Quick select position, or set the rotation, tilt and zoom on the sphere or with the sliders, then click Angles. The scene is redrawn from the new viewpoint; compare it with the original before delivering.
Can I see the back of an object from a single photo?
Yes, with the Back position (rotation 180°). The model has to infer what the photo does not show: the result is an interpretation, not a real view of the object. Check it before using it on a product page.
Can AI rotate 360° around a subject?
Yes: rotation goes from 0 to 360°, on the sphere or with the slider. Each click produces one still image at the chosen angle; for a video that circles the subject, you need a video model such as MiniMax H3 Max Multi Angle.
How is it different from rotating a photo?
Rotating turns the file by 90° or 180° without changing what it shows. The Angles tab moves the camera around the subject: the scene is redrawn from another viewpoint.
Do I need to write a prompt?
No. The tab has no text field: the rotation, tilt and zoom are sent, and the camera instruction is built from those values.
Can I change the angle of a photo of a person?
Yes, if it is you or the person has agreed: the model invents what the photo does not show of their face and body. If the image could pass for a real photo, say that it was generated with AI when you publish it, as Article 50 of the AI Act provides for manipulated content; the Beemm Vision terms ask for this too (article 6).
How much does an angle change cost?
The price depends on the size of the image, in megapixels, and shows on the Angles button before you click. An image over 14,142 px per side is refused before any charge. Each angle counts as one edit.
Can I change the angle of an image from ChatGPT or Claude?
No. Beemm Vision's MCP connector offers four image edits: upscale, remove background, fill an area and expand the frame. Angles and Relight are done in the app.

Try Angles

Open the studio, click one of your images, pick Angles and start with 3/4 right.

Keep reading