What Relight does
Relight redoes the lighting as if the light came from somewhere else: its direction, the shadows it casts and its color. The instruction asks the model to keep the subject, the framing and the objects where they are. So it is not a brightness or color setting for the whole photo. The model is fixed: Qwen Image Edit 2509 with a relighting LoRA, which the server sets on every call. Your settings become the instruction: a single light source, its direction, hardness, level and tint. To relight a video, you need another model, MiniMax H3 Max Relight; the other tools of the editor are in the photo editing guide.
6 positions
in Quick select for the light: Top, Front, Right, Left, Back, Bottom
360°
around the subject on the sphere, from -89° to 89° in height
0 prompts
to write: the instruction comes from your settings
The four steps
Step 1
Open the image in the Relight tab
In Generate, click an image, then the Relight tab of the preview, right after Expand. On a board, select a single image, then the wand button "AI retouch"; drop a photo of your own on a board first. The gallery of a workflow, the App mode gallery and the history of a board open the same editor, and the AI photo editor page sums up its other tools.
Step 2
Place the light
Quick select places the light in one click: Top, Front (the starting position), Right, Left, Back or Bottom. Between those positions, hold and drag the light on the 360° sphere: it goes around the subject, from -89° to 89° in height, and the thumbnail shows the lit side and the shadow. With the keyboard, the arrow keys turn it by 15° sideways and 10° up or down. For the model, the direction is turned into words: front, three-quarter, side, rear three-quarter or back, high or low; above 60° the light comes from directly above, and below -50° from below. Placed behind the subject, it becomes a backlight that outlines it.
Step 3
Set the hardness, brightness and color
Soft gives shadows with blurred edges, Hard gives crisp shadows. The Brightness slider, from 0 to 100, gives three levels: below 34, a dark, low-key mood; from 34 to 66, a balanced exposure (50 to start with); above 66, a bright, high-key mood. Pick any color in the color picker, white to start with. It is turned into one of eleven tints: neutral white, red, warm tungsten, orange, yellow, green, cyan, cool blue-white, blue, purple or pink. A barely saturated color stays neutral white.
Step 4
Run it and find the result
The button shows "Relight" and the price for your image, based on its size in megapixels. In Generate, the tile appears as soon as you click, the edit keeps going even if you refresh the page, and the result lands in your generations with the Relight badge, without replacing the original. On a board, it becomes a new version of the item, and the arrows take you back to the original. To then show the subject from another angle, follow up with the Angles tab.
The settings at a glance
| Setting | Values | Tip |
|---|---|---|
| Quick select | Top, Front, Right, Left, Back, Bottom | Front to start with; Back for a backlight |
| 360° sphere | All the way around, -89° to 89° in height | Turned into front, three-quarter, side, rear three-quarter or back, high or low |
| Soft or Hard | Blurred or crisp shadows | Soft for a portrait, Hard for strong relief |
| Brightness | 0 to 100, in three levels, 50 to start with | Below 34 dark, 34 to 66 balanced, above 66 bright |
| Color | Free color picker, white to start with | Turned into one of 11 named tints |
Ideas
Give a packshot more depth
A product lit from the front, switched to Hard light from the Right, gains shadows and volume. To put it on another background afterwards, start with background removal.
Warm up or cool down a mood
A warm tungsten or orange tint for the end of the day, a cool blue-white for winter or studio light, purple or pink for a neon mood.
Match a series of visuals
Note the position, hardness and color, then set them again for each image of the series: in Generate and on a board, the preview closes when you run it and the settings go back to Front, Soft, 50 and white. For a character across several images, see also the consistent character guide.
Frequently asked questions
- How do I change the lighting of a photo with AI?
- Open the image in AI retouch, Relight tab. Place the light with Quick select or on the 360° sphere, pick Soft or Hard, the brightness and the color, then click Relight. There is no prompt to write: the instruction comes from your settings.
- What is the difference between relighting and brightening a photo?
- Brightening changes the exposure of the whole image. Relighting redoes the lighting: the light comes from another direction, casts other shadows and can change color. The Brightness slider picks a dark, balanced or bright level for that new light.
- Can I choose the color of the light?
- Yes, with the color picker of the tab, white to start with. The chosen color is turned into one of eleven tints: neutral white, red, warm tungsten, orange, yellow, green, cyan, cool blue-white, blue, purple or pink. A barely saturated color stays neutral white.
- Does the subject change after relighting?
- The instruction asks the model to keep the subject, the composition and the objects in place, and to change only the lighting, the shadows and the color of the light. Like any AI edit, the result can drift a little from the original: compare before delivering, the original is still there.
- Can I relight a photo of a person?
- Yes, if it is you or the person has agreed. If the image could pass for a real photo, say that it was edited with AI when you publish it, as Article 50 of the AI Act provides for manipulated content; the Beemm Vision terms ask for this too (article 6).
- How much does a relight cost?
- The price depends on the size of the image, in megapixels, and shows on the Relight button before you click. An image over 14,142 px per side is refused before any charge. A relight followed by an angle change counts as two edits.
- Can I relight a video?
- Not with the Relight tab, which only handles images. For a video, MiniMax H3 Max Relight relights a clip from a reference image for the light, in Generate or on the canvas.
- Can I relight an image from ChatGPT or Claude?
- No. Beemm Vision's MCP connector offers four image edits: upscale, remove background, fill an area and expand the frame. Relight and Angles are done in the app. Video relighting with MiniMax H3 Max Relight does go through the connector.
Try Relight
Open the studio, click one of your images, pick Relight and start with the Right position.