Guide · Video

Upscale a video with AI: 1080p, 4K or 8K

A clip generated at 720p that has to ship in 4K, a video too small for a big screen: video upscaling rebuilds detail instead of stretching pixels. Beemm Vision offers three models, with no prompt, in Generate and on the canvas. Here is which one to pick for your video’s length and the resolution you want, in four steps.

5 min readBeginnerUpdated 15 November 2026

In short

To upscale a video: attach it to LTX 2.5 Upscale (30 seconds at most, to 1080p, 4K or 8K), to Gemini Omni Flash 1.2 Upscale (15 seconds at most, to 720p, 1080p or 4K) or to FlashVSR+ (2× in Generate, up to 4× and 4K on the canvas). No prompt is needed, and the cost shows before you run.

Your video
Upscale model
Target
1080p, 4K or 8K
Length
30 s at most
Prompt
None
The same video, at a higher resolution
How it works: your video, an upscale model, the same video at a higher resolution.Open the studio

What video upscaling does

A video upscale changes neither the framing, nor the motion, nor the length: it returns the same video with more pixels, rebuilding detail frame by frame. All three models start from an existing video, a file of yours or a clip from a video generator, and need no prompt. LTX 2.5 Upscale and Gemini Omni Flash 1.2 Upscale aim at a resolution (1080p, 4K…), FlashVSR+ multiplies the source’s. The cost follows the length of your video, measured by the server before anything is charged. For a still image, see image upscaling instead.

3 models

LTX 2.5 Upscale, Gemini Omni Flash 1.2 Upscale and FlashVSR+

Up to 8K

with LTX 2.5 Upscale; 4K at most with the other two

30 s

of video at most with LTX 2.5 Upscale, 15 s with Gemini Omni Flash 1.2

Examples made on Beemm Vision

The source video: 5 seconds at 720p, generated with Kling 4.0 Flash.
The same video raised to 1080p by LTX 2.5 Upscale, with no prompt and the sound kept.
Side-by-side close-up of the tram sign: on the left the 720p source video, on the right the same frame after the 1080p upscale
The same frame and area, enlarged without AI: the 720p source on the left, the 1080p render of LTX 2.5 Upscale on the right. Sharper, but the AI reinterpreted the small text: “28” became “2B”. Check signs and logos after an upscale.

The four steps

  1. Step 1

    Pick the model for the length and the target

    Up to 15 seconds, to 720p, 1080p or 4K: Gemini Omni Flash 1.2 Upscale. Up to 30 seconds, or for 8K: LTX 2.5 Upscale. To double the source’s resolution, up to 4K: FlashVSR+. In Generate, Video tab, all three carry the Upscale type: the "LTX 2.5" line under Lightricks, the "Gemini Omni Flash" line (version 1.2) under Google, FlashVSR+ under OpenImagingLab.

  2. Step 2

    Attach the video

    Drop the video into the "Video to upscale" slot: an MP4 for LTX 2.5 Upscale and Gemini Omni Flash 1.2, an MP4 or a MOV for FlashVSR+ (128 MB at most). On the canvas, connect an imported video, or the output of a video node, to the upscale node’s input: generation and upscale run in sequence. To try it without a file, first generate a short clip with Kling 4.0 Flash at 720p.

  3. Step 3

    Set the target

    LTX 2.5 Upscale: 1080p (the default), 4K or 8K. The frame count is capped by target: 601 in 4K, that is 25 seconds at 24 frames per second, and 241 in 8K, that is 10 seconds. Gemini Omni Flash 1.2 Upscale: 720p, 1080p (the default) or 4K, a higher resolution than the video’s. FlashVSR+: 2× in Generate; on the canvas, the Inspector’s Upscale Factor goes from 1× to 4×, as long as the result fits in 3840 × 2160.

  4. Step 4

    Run, then get the video

    The cost shows before you run; for FlashVSR+ it is the worst case, and the charge follows your video’s measured size and length. A video outside the bounds (too long, too many frames, unreadable length) is refused before any charge. The output lasts as long as the source, keeps its soundtrack with LTX 2.5 Upscale (and with FlashVSR+, by default), and lands in your gallery, ready to download or to connect to another node.

The three models at a glance

ModelAccepted video and targetTip
LTX 2.5 UpscaleMP4 up to 30 s, 200 MB; to 1080p, 4K or 8K601 frames at most in 4K, 241 in 8K; the sound is kept
Gemini Omni Flash 1.2 UpscaleMP4 up to 15 s; to 720p, 1080p or 4KThe target must exceed the video’s resolution
FlashVSR+MP4 or MOV, 128 MB, 900 frames at most; 1× to 4×2× in Generate, 1× to 4× on the canvas; 3840 × 2160 at most
PromptNoneThe model changes neither the framing nor the motion
CostBased on the video’s length and the target (the size, for FlashVSR+)Measured by the server before any charge

Use cases

Ship in 4K a clip iterated at 720p

Check the motion at 720p, with Kling 4.0 Flash for instance, then raise the shot you keep to 4K with LTX 2.5 Upscale: you only pay for high resolution on that one.

Double the resolution of an archive clip

A 720p video of 900 frames at most (30 seconds at 30 frames per second): FlashVSR+ doubles it (2×) in Generate, up to 2560 × 1440.

Chain generation and upscale

On the canvas, connect the output of a video node to an LTX 2.5 Upscale node set to 4K: every new render of up to 601 frames (25 seconds at 24 frames per second) also comes out in 4K, with no extra step.

A shot ready for cut-out

Raise the video’s resolution, then remove its background with LTX 2.5 Alpha Gen, which accepts up to 3840 × 2160.

Frequently asked questions

How do I upscale a video with AI?
Attach the video to an upscale model, in Generate (Video tab, Upscale type) or on the canvas: LTX 2.5 Upscale to 1080p, 4K or 8K, Gemini Omni Flash 1.2 Upscale to 720p, 1080p or 4K, FlashVSR+ by multiplying the resolution. No prompt is needed.
Can I upscale a video to 4K or 8K?
To 4K, yes, with all three models. To 8K, only with LTX 2.5 Upscale, and on 241 frames at most, that is 10 seconds at 24 frames per second. In 4K, LTX 2.5 Upscale accepts 601 frames, that is 25 seconds at 24 frames per second.
How long a video can I upscale?
30 seconds at most with LTX 2.5 Upscale, 15 seconds with Gemini Omni Flash 1.2 Upscale, 900 frames with FlashVSR+ (30 seconds at 30 frames per second). The length is measured by the server before any charge: a video that is too long is refused without billing anything.
Does the upscale keep the video’s sound?
With LTX 2.5 Upscale, yes, the soundtrack is kept. FlashVSR+ keeps it too by default. The output lasts exactly as long as the source.
How much does a video upscale cost?
The cost follows your video’s length and the target resolution: the higher the target, the more each second costs. For FlashVSR+, it follows the size and frame count of the output. The amount shows before you run, and the server measures the video before any charge.
Do I need to write a prompt?
No. All three models work on the video alone: they add pixels and rebuild detail, without changing the framing, the motion or the length.

Raise your first video to 4K

Open the studio on LTX 2.5 Upscale, drop an MP4 of 30 seconds at most and pick the 4K target.

Keep reading